Your issue is at the WR840N. You didn't say what the IP address on the WAN port of the device was, but based on the diagram, you are being blocked by the Firewall/NAT on this device, which is the separator between the LAN segment and the WAN port. Being a router with a firewall, each host on the WAN side needs to know how to get to the 192.168.100.0/24 network via routing table on the RV325 Sorry the correct model is TL-WR740N (Please see attached network config on TL-WR740N) Disable NAT and Firewall on the WR840N, if possible. Set a static route on the RV325 to the 192.168.100.0/24 network using the IP address of the WAN port on the WR840N as the gateway for that route. Please see attached of my routing on RV325 The simpler option, if possible, is to use a LAN port on the WR840N connected directly to the RV325, disable DHCP and just having a unified 22.214.171.124 network. I need to implement different LAN IP on RV325 (126.96.36.199/24) and WR740N (192.168.100.0/24) for security purposes.
... View more
Hi Sir / Ma'am, Hi guys could you help me resolving my concerns regarding routing. Currently I have 2 routers 1) RV325 and 2) TPLink WR840N My ping coming from 188.8.131.52 cannot pass through 192.168.100.0/24. I tried different config, but still no luck. I hope you guys could help me. Thanks a lot.....
... View more