About CODNetadmin

CODNetadmin · 05-21-2018

Hi Guys! Is there any way for the SIP 7940G to send SIP Option message or keepalives? Setup is 7940g <-->NAT <--> PBX As checked,it only sends REGISTER message every 1 hour, and no SIP OPTION or keepalive which we suspect the reason why the conne...

CODNetadmin · 05-21-2018

Hi! I would like to ask if there's any way to force a 7940 SIP converted phone(Non-CUCM) to send a Keep-alive or SIP OPTION Message?As we've monitored it only sends REGISTER then, that's all, no OPTIONS/Keepalives from the phone that's why its droppi...

CODNetadmin · 01-25-2018

Hi! We do have a voice gateway that needs to monitor a some debugs, But, every time we enable the debug, the VG crashes and needs to reboot. Is there a way for the debug messages/logs will be forwarded to a server? Like every debug output will be f...

CODNetadmin · 01-21-2018

I do have 2 dial-peers, the scenario and configuration is here. dial-peer voice 11 pots description T6000 to ROW (US) destination-pattern 0011T progress_ind setup enable 3 progress_ind progress enable 8 translate-outgoing called 8842001 port 3/0:D ...

CODNetadmin · 07-09-2017

Hi Everyone, Our 3750X port goes into err-disabled due to reaching mac-address limit but the show mac address-table is not showing enough mac addresses to reach this limit. Meaning, for example the port-security limit is set to 10, and the show mac t...

CODNetadmin · 05-21-2018

May I know how do you create a security profile for this one?

CODNetadmin · 01-25-2018

Ohh that's why. Great! Thank you so much!

CODNetadmin · 07-16-2017

Hi dperezoquendo, We are not using sticky. Thanks!

CODNetadmin · 07-16-2017

Hi Paul, This is appearing on multiple random ports. We have done all those. We don't want a workaround, we want a solution to this problem. I'm looking into upgrading, but i've never seen a bug similar to this. Thanks!

CODNetadmin · 03-22-2017

For radius nac, It's on the NAC State then select RADIUS NAC right? Got some problem enabling it since when I enable it, it says "Radius NAC is available only for WLANs that are configured for 802.1x/wpa/wpa2 layer 2 security or open Auth + MAC Filt...

Member Since	‎04-12-2016 01:13 AM
Date Last Visited	‎08-15-2018 08:36 PM
Posts	18

User Statistics

User Activity

7940G SIP to send keepalive/SIP Options

7940 SIP Config - Keepalive/Option Message

debugs forwarding to server

Outbound not hitting the correct/longest matched dial-peer

3750X port goes into err-disabled due to reaching mac-address limit but the show mac address-table is not showing enough mac addresses to reach this limit

Re: Hi, Finally it has given a

Re: Outbound not hitting the correct/longest matched dial-peer

Hi dperezoquendo,

Hi Paul,

For radius nac, It's on the