About raidokuvarnet

raidokuvarnet · 02-22-2017

Hello, I have configured a site-to-site VPN between linux and Cisco ASA 5510. Tunnel is up, but traffic is not being tunneled (i can not ping host from either site): Crypto map tag: WAN_map, seq num: 2, local addr: 80.250.119.69 access-list WAN_cry...

raidokuvarnet · 04-13-2016

Hello, My device Cisco ASA 5510, ASA 8.4(2), ASDM 6.4(5)206 What I try to achieve. 1) Host 10.10.11.108 listening port 8080 2) Trying to access it from WAN e.g port 8090 I tried following commands: object network 10.10.11.108_8080 host 10.10.11.10...

raidokuvarnet · 02-26-2017

How do I move VPN NAT rules on top?

raidokuvarnet · 02-23-2017

Hello, This got me to ping my remote gateway Cisco -> linux. But when I try to ping from linux -> Cisco I get ping time out.

raidokuvarnet · 02-22-2017

Packet tracker output: Result of the command: "packet-tracer input Serv icmp 10.10.10.10 8 0 10.10.12.10 detailed" Phase: 1Type: ROUTE-LOOKUPSubtype: inputResult: ALLOWConfig:Additional Information:in LAN2-network 255.255.255.0 WAN Phase: 2Type: IP-...

raidokuvarnet · 04-22-2016

Result of the command: "show nat 10.10.11.108" Manual NAT Policies (Section 1)1 (LAN1) to (WAN) source static 10.10.11.108_8080 interface service tcp-8080 tcp-8090 translate_hits = 0, untranslate_hits = 03 (LAN1) to (WAN) source static obj_10.10.11.1...

raidokuvarnet · 04-22-2016

Result of the command: "packet-tracer input wan tcp 4.2.2.2 8888 80.250.119.69 8090 det" Phase: 1Type: ACCESS-LISTSubtype: Result: ALLOWConfig:Implicit RuleAdditional Information: Forward Flow based lookup yields rule: in id=0xda1d5568, priority=1, d...

Member Since	‎04-13-2016 12:00 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	21

User Statistics

User Activity

VPN tunnel up but not passing traffic: pkts encaps 0 decaps 11

Problem with cisco 5510 port mapping

How do I move VPN NAT rules

Hello,

Packet tracker output:

Result of the command: "show

Result of the command: