Hi AllI have 10 cisco Switch 3750 in LAN. All these are in connected in Ring. All those are configured with multiple VLAN's and Routing is also enable. I want to enable STP on all these switches. In case if any links drop between two switches and aut...
Hi AllI have 3500 series switch that is showing just two giga ports all 24 ports are not showing can any help me its IOS were old after updating IOS still it is on same postion mean showing two giga ports 1,2
Hi alli have 3750 switch and it is giving message on syslog server it is sending these type of message continusely how can i i can get controle on these type of message%SW_DAI-4-SPECIAL_LOG_ENTRY: 2 Invalid ARP packets%SW_DAI-4-SPECIAL_LOG_ENTRY: 1 I...
Hi alli have SRW 208P and these are connected with 2950 and on syslog server i am getting these typ of message how can i controle%IGMPHOST-D-IP: IGMP Packet with unknown source IP^M
FastEthernet0/13 is up, line protocol is up Hardware is Fast Ethernet, address is 0004.4d27.66cd (bia 0004.4d27.66cd) Description: EDL-P-Box-NO-4 MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 250/255, txload 1/255, rxload 1/255 En...
All the core(3750) switch are connected on trunk and Distribution(3500/2950) switch are also connected on trunk with core switch(3750), then on Distribution switch (3500/2950) srw/Netgare are connected through VLAN
Thanx for reply,yeah this is right, By default this is enable on cisco Swiches 3750.I want to make one switch as a Root Switch and others as client.so does i need to configure only my Root Switch for STP or i will enable on all switches.
Hi ekhabarovHope will be good and thanks for response basically the SRW224P is configured and is working i can open it in internet explorer page but i want to access it through telnet i did best try but can not access through telnet i have many SRW20...
Hi ekhabarovHope will be good and thanks for response basically the SRW224P is configured and is working i can open it in internet explorer page but i want to access it through telnet i did best try but can not access through telnet i have many SRW20...