Have 2 4948 switches - one active with a single default vlan connecting several digital headend devices within the same subnet; the second is out of the box, unused.I want to "stack" the two switches (they are not physically "stackable") in effect ru...

Have 2 7206VXR gateways each conected to different ISP via BGP. Getting full routes from ISPs to start - plan to filter later. Migrating from a single ISP via static default, as well as internal static routes. Have OSPF running between gateways as...

Tier 3 multi-homed AS connected to 2 different ISPs.One 7206VXR will be hot, another in standby (hot connects to both ISPs simultaneously, as does standby; both via DS3)with load sharing between the 2 ISPs off the hot router only. LAN routes are 100%...

7200 series gateway will be dual-homed to 2 different ISPs running BGP. Interior routes are 100% static, with some networks directly connected.Goal is to add the gateway router's predecessor, also a 7200 series, as a hot standby only. No load shari...

Currently use static routes with multiple route statements; will be implementing HSRP with BGP on the gateway - looking for opinions for most pain-free protocol integration to use (ie OSPF vs EIGRP). Presently 80% Cisco routers, primarily 7200 serie...