About pramith

pramith · 02-21-2020

Hi Team,We have moved one of sx20 VC device from one location to another. Now we need to configure the VC device. For touch panel and codec VC VLAn is configured.but not sure how to assign IP to codec and touch panel Since no remote is available to e...

pramith · 11-19-2019

I have tried resetting the device, its boots up and shows Cisco logo, then the display went off, i can see power led white led ON and touch panel volume lights. no image on display... Can someone help me to to fix this, or to find out the exact is...

pramith · 11-19-2019

can someone give the solution to fix this issue? Resetting the codec will fix the issue?Let me know what action i need to take to fix the issue.

pramith · 11-12-2019

Hi ,Can someone explain me how does the SIP point to point VC call works. Example: SIP endpointA at Bangalore and Endpoint B at Pune. How does call get initiated and how it flows,

pramith · 12-01-2019

MX700 is running in ce 9.5.0 version, for this also same? Maintenance mode will kick in when it fails to boot? What is exact reason for this Maintenance mode error?

pramith · 11-13-2019

The document which you have sent is understand the sip in depth, i just want to know the flow.... like...point A wants to call point B. 1)Does the request sent to CUCM first?2)What cucm will do?3)When DNS get involves in this. 4)What DNS will do pl...

Member Since	‎11-12-2019 07:45 AM
Date Last Visited	‎02-28-2020 10:44 AM
Posts	6

User Statistics

User Activity

Sx20 configuration

EX90 not working

MX700 not working and displaying "maintenance mode "

SIP VC endpoint call flow

Re: MX700 not working and displaying "maintenance mode "

Re: SIP VC endpoint call flow