Hi, if I remembered correctly, the "sh crypto eng acc stat" command only works for AIM modules for the 26xx/36xx/37xx routers. I had not learnt the command that shows the same information for ISA/ISM modules in the 7100/7200 series router yet. If any...
The x.121 address in the translate command is the in-coming or called address, which is normally the x.121 address of your interface with subaddress appended to the end. The subaddress portion is to distingush different servers/destinations. I guess ...
One of the factors is the type of LMI protocol we are using. BW will show up if we are running Cisco LMI, it won't if we are running ANSI-D (LMI type can be determined by the show LMI command).
As I understood it, the ISDN send-alerting command is for communicaiton betweeb the router and the telephone company's ISDN switch. Its function is to send an alert message to the switch prior to making an actual call. It is only part of the dialing ...
Hi, check whether the two X.25 hosts are running PVC or SVC. If they are using SVC, the PVC setup will not work and you may want to switch to a SVC XOT setup.