Hi Guys , APIC can add F5iWorkflow as Hybrid ( neither fully Managed nor Unmanaged ) where Service Attributes can be taken care by iWorkflow , Is it recommended for UCSD to directly interface with iWorkFlow or through APIC controller ? Regards,
We can check from two easy clis as follows
admin show platform admin show version
32BIT output of the clis
RP/0/RSP0/CPU0:ASR9001-A#admin show platformSat Sep 28 02:00:44.144 GMTNode Type State Config State------------------------------------------...
As the delta is significant ( Skipping 5xx and going to last release of 63x ) , I recommend testing the upgrade first by upgrade method and if it fails , we can try turboboot ( if acceptable to the Customer for such a downtime ) before deploying it
...
I don't think with RSP440 , you can load 642 , so 633 will be the latest to deploy based on your show platform. Please have a look @ https://www.cisco.com/c/en/us/products/collateral/routers/asr-9000-series-aggregation-services-routers/eos-eol-notice...
For 6.4.2 , can you please give it a try to https://software.cisco.com/download/home/282267600 and scroll down to 9922 and its SW and you will find 64BIT XR SW there.I will work with the owners internally to get this fixed.