About Bernhard82

Bernhard82 · 04-22-2016

Hi, I have a issue with my couple of IE-3000-4TC running 12.2(52)SE, The logs are showing power supply A flapping between on and off yet the switches do not actually turn off. below are the logs for one of the switches 000590: Apr 22 15:35:12.912 WA...

Bernhard82 · 01-31-2019

Nope, but I never understood why any would want to disable MCS rates, legacy yes that I understand

Bernhard82 · 01-16-2019

Can AP's ping the controller? Do some debug capwap detail enable see what the logs say. if not on the same subnet as controller will have to use other join methods, such as dhcp option 43, DNS- resolution, or pre stage AP's with controller IP addre...

Bernhard82 · 01-15-2019

What is your wireless requirement, Buisness services, guest etc, this should determine your security requirements. if business services I would strongly suggest EAP-TLS.

Bernhard82 · 01-15-2019

8.0.120 supports that AP model, does it occur on any other AP's of the same model? have you done a bug search?

Bernhard82 · 01-15-2019

what are you using to determine that it is slower and do you have historical information to indicate this? Wifi is slower still means the wireless is working.

Member Since	‎04-18-2016 11:57 PM
Date Last Visited	‎10-09-2022 06:54 PM
Posts	32
Total Helpful Votes Received	20

User Statistics

User Activity

IE-3000 power supply issue

Re: MCS rate disabled 0 to 15 must be set at minimum, as supported

Re: AP Aironet1830 is not detected on wlc 3504 via vlan

Re: Best solution with ISE + WLC authentication

Re: AP got into disable mode very often with error message:Image data request received from an unsupported AP

Re: outdoor access point gets slower at night