About Anwar Mohamed

Anwar Mohamed · 06-11-2016

I an having trouble setting up a Static to Dynamic IPSEC site-to-site tunnel I have a juniper device on the remote end with dynamic IP. Mentioned below juniper SSG config, which i believe is true. configuration is based on route-based VPN. I need to...

Anwar Mohamed · 04-29-2019

I learned that these acls are processed in hardware and the hit count option is for access lists processed In software like the ones applied on SVI or layer 3 interfaces. So looks like you may not see the hits, unless the the switch you have processe...

Anwar Mohamed · 04-29-2019

I learned that these acls are processed in hardware and the hit count option is for access lists processed In software like the ones applied on SVI or layer 3 interfaces. So looks like you may not see the hits, unless the the switch you have processe...

Anwar Mohamed · 06-12-2016

Hi, Thanks for the replies. Will the below do for the cisco router? crypto isakmp policy 10 encr aes 256 authentication pre-share group 2 lifetime 28800 crypto isakmp key emitac123 address 0.0.0.0 0.0.0.0 crypto ipsec transform-set TS esp-des esp-...

Member Since	‎04-19-2016 11:21 AM
Date Last Visited	‎12-26-2023 11:50 PM
Posts	4

User Statistics

User Activity

Static to dynamic Site-to-Site VPN

Re: dACL's Logging

Re: dACL's Logging

Hi, Thanks for the replies.