My company has four sites connected over MPLS using BGP and within each site we use EIGRP.  In each site we have a vlan (lets call it vlan 3) that needs to be segmented from the other vlans at layer 3.  Within the individual lans this would likely ju...

Hello, I wish to segment a single vlan using VRF-LTE from the global routing table.  Can I create a single vrf for that vlan, associate the SVI with the VRF and then configure a new EIGRP AS to do dynamic routing for the VRF/Segmented Vlan?  And in d...

So this morning I saw something odd.  Apparently my BGP neighborship between my CE router and ISP PE router flapped several times between last evening and this morning.  I see in the log where it flapped after 7pm last night and when it flapped aroun...

We are consolidating our two single-homed WAN edge routers into one multi-homed edgerouter.  We currently have a dedicated edge router for each ISP configured for eBGP and EIGRP.  We handle Primary ISP route preference by configuring the bgp to eigrp...

We have a new layer 2 ELAN network between 3 of our sites.  Ultimately I will need to pass all traffic on VLAN 13 between the sites using this layer 2 network.  With all other VLAN traffic traversing our MPLS network between sites.   However, initial...