Hi, I have this UC520 which has had a power surge. After booting it will now only display "error during spi read of vwic". This is unfortunately not the optional VWIC because the error remains after removing the interface. I don't need the vwic for communcations since the unit will be SIP trunking into our Broadsoft platform. Is there a way to get around this or has the hardware died out on us? This is what te boot screen looks like now: UC500 series platform with 262144 Kbytes of main memory Readonly ROMMON initialized program load complete, entry point: 0x80015000, size: 0xb700 program load complete, entry point: 0x80015000, size: 0xb700 program load complete, entry point: 0x80020000, size: 0x1ac3950 Self decompressing the image : ######################################################################################################################################################################################################################################### [OK] Smart Init is enabled smart init is sizing iomem ID MEMORY_REQ TYPE error during spi read of vwic- 0 error during spi read of vwic- 1 error during spi read of vwic- 2 error during spi read of vwic- 3 0X00135430 Onboard PVDM2 SIMM 0X00003960 Onboard Ethernet 0X0011D000 Onboard VPN 0X000F3BB0 public buffer pools 0X00703000 public particle pools TOTAL: 0X00A4C940 If any of the above Memory Requirements are "UNKNOWN", you may be using an unsupported configuration or there is a software problem and system operation may be compromised. Rounded IOMEM up to: 10Mb. adjusted iome size up to minimum size of: 0X00C00000 Using 4 percent iomem. [12Mb/256Mb] Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 12.4(20)T2, RELEASE SOFTWARE (fc4) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2009 by Cisco Systems, Inc. Compiled Sun 01-Feb-09 00:18 by prod_rel_team error during spi read of vwic- 0 error during spi read of vwic- 0 error during spi read of vwic- 0 error during spi read of vwic- 1 error during spi read of vwic- 1 error during spi read of vwic- 1 error during spi read of vwic- 2 error during spi read of vwic- 2 error during spi read of vwic- 2 error during spi read of vwic- 3 error during spi read of vwic- 3 error during spi read of vwic- 3 error during spi read of vwic- 4 error during spi read of vwic- 4 error during spi read of vwic- 4 error during spi read of vwic error during spi read of vwic error during spi read of vwic error during spi read of vwic error during spi read of vwic- error during spi read of vwic error during spi read of vwic error during spi read of vwic- error during spi read of vwic error during spi read of vwic error during spi read of vwic- error during spi read of vwic error during spi read of vwic error during spi read of vwic- error during spi read of vwic error during spi read of vwic error during spi read of vwic- error during spi read of vwic etc. etc. etc.
... View more
