Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
For stateless autoconfiguration, does DHCPv6 need to be set on both router interfaces such as FastEthernet0 and FastEthernet1? So a pool called Segment2 does it need to be on both router interfaces or just one? I am working on getting DNS to beha...
Good afternoon,I have a Windows 2003 server running Active Directory and maintains my DNS records. This is sitting on the 2001:db8:0:1::/64 segment. I have devices that are on my 2 and 3 segments respectively. I have entered the devices into my...
I am trying to configure this switch to create the EnergyWise global configurations and domains but am not seeing that option available to me in the enable tables. Do I need to be on a specific switch port to perform this operation?Thanks
Unfortunately I have had an emergency that I am finally finishing up with. I am hoping to test this afternoon. Thanks for the continued interest and I will let you know of my success or failure.ThanksGreg
The step reads to enable processing of packets with source routing header options which is on p. 34 of the doc you had refered me to. It looks like on P. 32, I need to have all three pieces enabled. ThanksGreg
It looks to me I need to configure both the server and client pieces then the source route, correct? I have another set of 1812 routers that I am using to try these configs out.Thanks for the assistance.Greg
