About RaveDave1

RaveDave1 · 11-19-2010

I have a customer that is looking to purchase either a 9506 Directory with 48-port 8Gbps ports or 9148s.He needs NPIV on some ports, and other ports that are non-NPIV.The documentation for NPIV states that NPIV is enable on the 9148 for the whole swi...

RaveDave1 · 05-07-2009

I have a PIX running 7.2(3) that I have allowed FTP traffic to a server on the inside interface.The "outside" interface has an ACL configured to allow the FTP/FTP Data traffic using "outside" IP address for the ftp server. A static NAT is also confi...

RaveDave1 · 06-04-2008

I have a WLC 2006 running 4.2.130 code with AP1020s.I also have several users that have VMware machines that run various flavors of Linux, etc Virtual Machines on Windows XP Pro.The Windows XP works fine on the wireless. It is the VMWare Virtual Mac...

RaveDave1 · 02-09-2006

I have a customer with a 1400 link that had the indoor power injector and power supply stolen.I am ordering the AIR-PWRINJ-BLR1=. Does this come with both the power injector and power supply?If it doesn't come with the power supply what can I order ...

RaveDave1 · 09-21-2005

I work for a reseller and am trying to put a demo box together that will include WCS.I am using WCS 3.0 and VMWare 5.0 on a Windows 2000 Advanced Server.I had worked fine on this server before, but doesn't seem to work on the virtual server on the sa...

RaveDave1 · 11-19-2010

Thanks for the info, that is exactly what I was looking for.Dave

RaveDave1 · 11-19-2010

Thank-you for the reply.Does this mean that if I have NPIV enabled on the switch, I can have an NPIV port and a non-NPIV port on this same switch?It would just be a matter of configuring individual ports for NPIV other ports while other ports are non...

RaveDave1 · 07-30-2008

Will the controllers ever support this? If so, what release?Dave

RaveDave1 · 05-25-2006

I had an identical problem with my WLC2006 and a converted AP1231G.Found out that the upgrade utility had incorrectly formatted the controller configuration commands. Check your log files in the \log subdirectory of where you have the upgrade tool l...

RaveDave1 · 02-10-2006

Thanks for the info. Added it to the order for my customer.Cisco's web site has almost no info on this. I searched for over 2 hours yesterday, trying to see if there was some combination of search parameters that would give me the info or if there ...

Member Since	‎08-02-2005 09:41 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	10

User Statistics

User Activity

Using NPIV on a 9506 Director and 9148 switch

PIX ignoring ACL configured rule

Getting DHCP on a VMWare Virtual Machine via wireless

Customer 1400 Power injector stolen

WCS on VMWare

Re: Using NPIV on a 9506 Director and 9148 switch

Re: Using NPIV on a 9506 Director and 9148 switch

Re: Getting DHCP on a VMWare Virtual Machine via wireless

Re: IOS to LWAPP converted AP don't join to a controller 4402

Re: Customer 1400 Power injector stolen