Thank you very much. By adding 4 dummy rules just like you indicated, DNAC was able to create the whole authentication policy on ISE.See screenshot joined for an example of 4 dummy rules.
Are you seeing logs on the ISE RADIUS Livelogs?First thing to check is if the Access-Request is received by your ISE Server.If the request was dropped by the ISE Server, you will have an explaination on the log.If the Request was not received, I woul...
Hello,Can you check the power transmit level for this Access Point AP-27?It can be a problem of asymetric transmit power level between the end device and the AP.The AP seems to have a strong signal from the client but the end device may received a lo...
Hello,Mauritania and Senegal are not in the list of the country code available on Cisco WLCs.Not easy to find, but you can check the authorized channels in the link below fron the Linux Kernel:https://git.kernel.org/pub/scm/linux/kernel/git/sforshee/...
Hello, According to the log, the first RADIUS request and the retransmission from the WLC received no answer fron the ISE Server.I would check the RADIUS livelog on ISE to see if everything is fine (WLC added as a NAD, no RADIUS key mismatch, etc.).
