About adrien.dupont

adrien.dupont · 10-20-2017

Hello Experts, I have an issue with our Cisco WAAS and the MAPI protocol. There is our scenario : - 1 WACM : WAVE-294-K9, version 5.5.3.b59 - 2 WAAS on the DC : WAVE-694-K9, version 5.5.3.b59 - X WAAS on remote site : WAVE-294-K9, version 5.5.3.b59...

adrien.dupont · 07-27-2017

Hi everyone, I have an issue with our WAAS. We use the version 5.5.3.59 on OE694 and OE294 and accelerator cifs is enable. When we create a preposition file in Home > Configure > CIFS File Services > Preposition and we use a location in FileServer S...

adrien.dupont · 05-31-2017

Hello everyone, I try to configure a kind of Fallback RADIUS, I explain : Il want two radius server in my WLAN : - In one RADIUS, we have serveral users (first AD) - In the other one, we have the rest of our users (second AD) Is it possible to swit...

adrien.dupont · 02-20-2017

Hello Everyone, I have a question about Cisco WAAS (Wide Area Application Services). We want to use the new WAVE-294, WAVE-594 and WAVE-694 in Inline mode (no wccp) We have several WAVE with WAVE-INLN-GE-4T included (by Cisco) in order to use the In...

adrien.dupont · 08-22-2017

Hello Finn,Thank you for your reply. We found that we have the preposition configuration at the end of the remote WAAS. It's possible to add a preposition statement in CLI but it can be visible in the GUI. The opposite is not true. Yes, we tried with...

adrien.dupont · 06-01-2017

Hi, So it's not possible on Cisco WLC. I just want to compare with a another manufacturer, we have this option : fail-over: Fail-over is always enabled. Fail-over means is that if the first auth-server is not reachable (time-out), the second server...

adrien.dupont · 02-21-2017

Hello, We tried again in this order : 1 - write erase without the card included 2 - shutdown the device 3 - insert the Inline-Card 4 - Boot the device 5 - Enter the commande "interception-method inline" And that's all. i think we have the problem wh...

adrien.dupont · 07-27-2016

Hello, There is a Cisco bug : CSCuz64174 / PI 3.x - Missing links in topology with latest DP 4/5. Symptom:links between devices are randomly missing.Conditions:The DP will cause links to be not detected for devices discovered AFTER applying DP4 or ...

adrien.dupont · 05-02-2016

Hello,We have the same problem with our CPI 3.0.0.0.78. We added the switch with SSH and SNMPv2 credentials and when we go to the Network Topology, we only see the switch and no links.When we click to the 360view, we can see that "only" Local Remote ...

Member Since	‎05-02-2016 06:41 AM
Date Last Visited	‎12-04-2023 12:45 AM
Posts	12

User Statistics

User Activity

MAPI encryption on WAAS 5.5.3

WAAS Preposition - In Progress Forever

Next RADIUS if fail authentication

WAAS Inline Card Issue

Re: Hi Adrien,

Hi,

Hello,

Hello,

Hello,We have the same