About jason_song

jason_song · 08-15-2012

Hello,I'm reposting this discussion here.I have designed GLBP with vPC configured in a pair of N7K switches. But in Cisco documentation, the best practice configuration uses HSRP in vPC environment. Customer doesn't feel comfortable with GLBP since C...

jason_song · 08-14-2012

I have designed GLBP with vPC configured in a pair of N7K switches. But in Cisco documentation, the best practice configuration uses HSRP in vPC environment. Customer doesn't feel comfortable with GLBP since Cisco's best practice using HSRP. Is th...

jason_song · 08-15-2012

Sean,Thanks a lot.Regards,Jason

jason_song · 08-15-2012

Hi Sean,Thanks for the link. It is very helpful. I understand that both GLBP and HSRP can perform active/active load balancing in vPC domain. My question is if there is any potential issue when using GLBP (industry standard) with vPC (Cisco propr...

jason_song · 08-14-2012

Hi Juan,I think ASR1 router should receive all routes from PE so you can verify this with sh ip eigrp top all command. This command will tell you if there is any route failing feasible condition because different PE routers in SP network. Also, I d...

Member Since	‎01-10-2007 11:04 AM
Date Last Visited	‎03-14-2024 09:05 AM
Posts	5

User Statistics

User Activity

GLBP with vPC configuration acceptable?

GLBP with vPC configuration acceptable?

GLBP with vPC configuration acceptable?

GLBP with vPC configuration acceptable?

Re: EIGRP Problem in ASR