About pcameron

pcameron · 08-31-2018

First up I need to state I am a complete newbie to AXL and API operations so this may appear to be a very dopey question. We are experimenting with external provisioning of CUCM servers. It’s all very basic and we are very much noobs at this , so ...

pcameron · 09-27-2010

Ok ... so the background to all this is that the 'Plain Old Telephone System' (POTS) was always intended to have people on either side of the connection and they would be able to determine when the conversation was finished and they could then hang u...

pcameron · 09-27-2010

There is a problem with earlier 12.4.15T code involving in band tone leakage at the start of the DTMF detection process on the DSP. This is described in Cisco bug CSCso87127, fixed in DSP firmware bundle 9.4.7 that was integrated in IOS version 12.4....

pcameron · 09-07-2009

This is a well known issue. Refer to the following URL's for more details on the cause - Here are some links that you may want to take a reading:http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K32177793http://www.cisco.com/cgi-bin/Suppo...

pcameron · 09-07-2009

It's working exactly as you have configured things. Your dial peer 3 has a destination pattern of '....' so it will match on ANY 4 digits. The destination pattern on dial peer 1 will be expecting 0 with 7 more digits, so after any 4 digits the call w...

pcameron · 09-07-2009

use the more command - router#more readme.txt

Member Since	‎09-22-2003 02:22 PM
Date Last Visited	‎10-26-2022 12:03 AM
Posts	349
Total Helpful Votes Received	596

User Statistics

User Activity

Using AXL to update CUCM Region Matrix

Re: FXO Disconnect Problem ;)

Re: Duplicate dtmf? through vg224

Re: 7940G - Really stuck

Re: PSTN calls in SRST mode

Re: read text file in Flash