Hi, Im configuring a switch model WS-C2960G-48TC-L and GigabitEthernet0/45 - 48 which has both RJ45 and fiber port available. I'm connecting to the RJ45 port and i'm wondering if there is any special command required because i cant get the port worki...

Hi all, I've a simple doubt that needs clarificationSwitch AFa0/23 (VLAN 60, access mode). connect to the internet GW 192.168.1.1 mask 255.255.255.0 (for eg). Fa0/22 (VLAN505, access mode).PC B - connected to VLAN 505- IP address 192.168.1.100 config...