Hi,I would like to confirm if or not Catalyst3850 with IOS-XE 03.07.05E supports "per packet load sharing".If anyone let me know how to make sure about it, I would appreciate very much.Thank you.
Hi, Is it possible to force LAP running with channel 52, 56,60 or 64?I have configured LAP running channel 36 - 48 statically, using WLC.But I cannot configure statical 52 channel for my LAP in lab.Thank you for your advice.Kawakami in Tokyo
Hi, I would like to take the customer's cucm DRS backup data to restore it into my lab system.The customer does not allow me to connect my PC running SFTP server to their network, due to security control.But they say ok if I connect the PC to the pub...
Joseph,Thank you for your reply and advise.I would supplement the customer with the advantages of per-destination configuration. Regards,Kawakami, Tetsuo
Abhishek,Thank you for your help.I tried to change channel for the LAP 3502 using WLC, referring to below;http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70rrm.html#wp1099018On GUI, "custom" radio button and following dro...
Please find attached show version for the AP.I found "dfs band" command is not allowed in dot11radio interface for the AP.I wonder if it is because old IOS version or WLC environment. I am confused.I would appreciate any advice. Thank you.-----------...
