Hi,I need create a new firewall rule using a regex. I looking for this in all Cisco documentation but I do not found nothing about it. Can Cisco ASA support this kind of firewall rule ? Thanks,
I have a vpn tunnel between Cisco ASA Firewall and Juniper Firewall. The phase one and phase 2 is ok and the traffic go from ASA to Juniper is ok but the another site from Juniper to ASA doesn´t works. Could you help me ?My local network is 10.0....
I have one nexus 7000 with F2 blade and FEX 2248TP-E using VDC feature. I have setup all FEX configuration but the communication between 7000 and 2000 is down. The physical connection doesn't work.We change the fiber and sfps but the problem is the...
Hi, I have some problem here about VPC and logical interfaces in my switch nexus 5596. I create two interfaces vlans called Vlan2 and Vlan 900. The Vlan 2 is for management purposes and Vlan 900 is a link to VPC communication. My problem is - I al...
I had some problem about switches unspected reboot after some time because it had a memory problem or something like that.
Another problem about some switches to not reboot in a periodic time is about patch management. I think if we have one switch ...
I know you do not see this interface in "sh run" command but you can add this configuration:conf tint mgmt 0 ip address x.x.x.x/x vrf member management no shuttry again sh run and you will see the interface management configuration.
