About m.isargar

m.isargar · 09-30-2020

Hi,We want to move our main number (12345XXX) to the new Gateway2. Old Gateway1 is connected to PSTN via a PRI link and Gateway2 uses SIP. Both gateways are talking H.323 to CUCM. Recently, I have carried out some tests on second gateway in order to ...

m.isargar · 12-08-2019

Hi,We're using CUCM 11.5.We've configured automatic call recording successfully with Phone as the source (Phone Preferred) and MediaSense as recording server. I've read about soft-key configurations to enable selective recording in IP phones. Is it p...

m.isargar · 11-25-2019

Hello everyone,Consider the following setup:Our current numbering format: 12345XYZ. An E1 link connected to a Cisco 2921 router which acts as the VoIP gateway.Our numbering in the new location: 67890XYZWe want to redirect all inbound calls from outsi...

m.isargar · 10-01-2020

Hi, Thank you so much for your comment.It did worked.

m.isargar · 11-27-2019

Hi Chris,I'll check that and let you know the result.Thank you.

m.isargar · 11-26-2019

Hi,Called number: 64063168debug isdn q931Nov 27 04:42:42.311: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8 callref = 0x215ASending CompleteBearer Capability i = 0x8090A3Standard = CCITTTransfer Capability = SpeechTransfer Mode = CircuitTransfer Rate = 64...

m.isargar · 11-25-2019

Dear Chris,Thanks for the answer.We have CUCM, but for some reasons, we have to implement this on the GW. Also, It's PRI.I did some debug commands to figure out the full incoming digit string which show only the 3-digit directory number (I mean XYZ)....

Member Since	‎11-25-2019 03:10 AM
Date Last Visited	‎10-01-2020 06:28 PM
Posts	7

User Statistics

User Activity

UCCX Call Drop

Selective call recording with Cisco Jabber

Redirecting calls due to relocation

Re: UCCX Call Drop

Re: Redirecting calls due to relocation

Re: Redirecting calls due to relocation

Re: Redirecting calls due to relocation