About RostislavVlaev

RostislavVlaev · 11-02-2012

Good afternoonWe have a 887VA and a dns/web/mail/ftp server behind (below address 192.168.99.100).first problemI forwarded the necessary ports to the server address, but now the domain became invisible and all the above servers stops to respond.secon...

RostislavVlaev · 10-30-2012

Good Morning,Our company just purchased a 887VA ADSL/VDSL router.I don't havy any experience with Cisco routers and I feel a bit ashamed, but I really need some help.When powered the router, all ports are off. in CLI the router starts, but obviously ...

RostislavVlaev · 10-22-2012

Good afternoon,Just purchased a UC540. when powered up there is no connection an all ports.How can I connect & run the CCA. I look very much to find a startup guide but didn't succeed.Is ther any doc / procedure to start that unit.sorry to disturbing...

RostislavVlaev · 11-06-2012

Thanks again for helping me.No the server is in my office. I check the different service servers responses from my office computer (inside, connected to the vlan) and my home (outside).The server mashine pings w/o any problem 8.8.8.8 the dns works a...

RostislavVlaev · 11-06-2012

Hi,Than ks for the help.I discover that in reallity I didn't detect my problem at all. I mean I have not any problem with the server mashine neither with the running servers on it, but only when I access them from outside. I mean, when I'm home I ca...

RostislavVlaev · 11-04-2012

Well,as the waiting for help was too long, i've helped myself.The lines below are for people like me who have to fight the 887va blackbox alone. To fix the second of my prblems I had simplt to start a dsn server on the 887va2 commands ip dns ser...

RostislavVlaev · 11-02-2012

First of all thank you for the responseBTW where is the button to rate the posts? I've searching but didn't find any.back on my painI think that I didn't defined well my problem.FirstWe have a server (not domain controller, we have workgroup only) w...

RostislavVlaev · 11-02-2012

Sorry i forget.As you'll see below there are 3 lines of ip dhcp exclude.....I typed them by error twice and don't know how to delete the unnecessary lines from the config if you can help thanks in advance

Member Since	‎10-22-2012 08:33 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	14

User Statistics

User Activity

My Server behind a 887VA stops to working

Start and initial configure a 887VA-SEC-K9 ADSL/VDSL Router

UC540 first run - can't connect

My Server behind a 887VA stops to working

My Server behind a 887VA stops to working

My Server behind a 887VA stops to working

My Server behind a 887VA stops to working

My Server behind a 887VA stops to working