Hi,I've configured Flexible Netflow on a Cisco ASR 1000, IOS XE Version 15.3(3)S2 to keep trace of the Source and Destination AS numbers of the traffic going to and coming from the Internet.This is an example of what I get with the command "show flow...
Hi,I'm using Whatsupgold as a Netflow collector .When I configure Flexible Netflow on a Cisco ASR 1000 as follows:flow exporter Whatsupgolddestination 192.168.10.10source GigabitEthernet0/0/0.970ttl 10transport udp 9999flow monitor Flow-Monitorexport...
HI,I cannot understand the resource allocation of the ACE I have configured, in particular why the MAX allocation is lower than the MIN allocation, or even 0.Probably, it's related to the RC0 class, where the maximum is set as unlimited, but ...
I configured a HTTPS-HEAD Keepalive in a GSS that fails even if the server responds correctly. The problem could be that the server responds with a not trusted certificate. Does anyone know what the GSS's behaviour is in this particulal case? Thanks....
From the CCNP SWITCH Book:"The UplinkFast feature on Catalyst switches enables leaf-node switches or switches at the ends of the spanning-tree branches to have a functioning root port while keeping one or more redundant or potential root ports in Blo...
Hi,I've managed to make it working but I still have a problem: I cannot interpret the data.Most of the traffic appears to come from an UNKNOWN AS: what does it mean? Thanks. Alessandro
Thanks Fnu for your kind reply, but if you have a look at the "show resource usage" I posted, you can see some values I can't understand. Focusing on ssl-connections: Context A has a MIN = 1000, while MAX is 1000 Context B has MIN = 500 and MAX = 0 C...
Sorry guys, I've already caused two headaches and I feel a bit guilty...Seriously speaking, I just think there's a lack of good scenarios in books: they always show very simple situations and, in that way, they end up in not being exhaustive at all.A...
But the question is: is that example correct? How is it possible that (assuming that all other port states are correct) on the network segment SW2-SW3 the Designated Port is on SW3 instead of SW2? If it were on SW3 it would mean that the cost of the ...
Hi Jon, thanks for your answer but I don't understand some of those ports' roles.Let's call Nxy the network that connects SWx and SWy, Cxy the cost associated to it (100 for Ethernet, 19 for FastEth., 4 for GigabitEth. ), Pxy the port from where SWx ...
