About lapinmort

lapinmort · 12-01-2010

I have configured two C1812 routers with the same amount of RAM, Flash, IOS, and configuration except for the IP addresses and next hop routes. Yet they behave differently. Both routers use Fa0 and Fa1 as WAN interfaces to the ISP1 and ISP2 routers r...

lapinmort · 12-04-2010

Use tftpdnld from rommon.Fast and easy transfer via ethernet.

lapinmort · 12-03-2010

Try the configuration here:http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xe/feature/guide/dbackupx.htmlPay particular attention to this part:Configuring Reliable Static Routing Backup Using Object Tracking: DHCP ExampleThe following example conf...

lapinmort · 12-03-2010

You created redundant routes to your LAN. Those entries won't even pop in the routing table since your LAN is directly connected.ip route 10.10.10.0 255.255.255.0 FastEthernet0 10 track 100ip route 0.0.0.0 0.0.0.0 58.27.132.105ip route 10.10.10.0 255...

lapinmort · 12-02-2010

I find it hard to believe that your network people allocated 0% bandwidth to the best effort traffic. You usually want to allocate %25 of your bandwidth to best effort traffic, because it accounts for all the traffic you don't mark with a DSCP value....

lapinmort · 12-02-2010

QoS definitely requires a lot of planning any way you approach it.I would advise you to get familiar with the behavior of the different traffic flows going through your router, and identify them first. Also find out the different queueing strategies ...

Member Since	‎02-19-2007 11:40 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	14

User Statistics

User Activity

Whacky default route tracking behavior on C1812 routers (IOS 12.4) with dual ISP

Re: cisco IOS transfer.

Re: IP SLA Failover

Re: IP SLA Failover

Re: Need help understanding QoS and police command

Re: Need help understanding QoS and police command