About sljwampa

sljwampa · 12-08-2017

We had an access point max out our buildings bandwidth a few days ago. I am trying to figure what clients were connected to an access point during a specific time frame. I know the data is there as when I search a mac address I can see all the WAPs...

sljwampa · 12-08-2017

Sorry I meant a timeframe lets say all clients on a WAP that day or during an certain hour.

sljwampa · 12-08-2017

Right. I have been looking at those but would really like to see clients connected to specific WAP during specific time. Any ideas on getting this? I can see this real time and I know the data is in there somewhere...

sljwampa · 12-16-2010

First I try not to use spanning-tree portfast in my enviroment. Seems to work fine with phones. Even with spanning tree and bpdu guard we get loops when devices that don't have spanning tree or bpdu get looped. There doesn't appear to be a good so...

sljwampa · 12-16-2010

As you see from my stack ipservices will work with ipbase. If you are using OSPF or any dynamic routing you will lose it in the downgrade.Regards,

sljwampa · 12-16-2010

I think you need to update the code on your 3750G's. Here is what the docs say.http://www.cisco.com/en/US/customer/docs/switches/lan/catalyst3750x_3560x/software/release/12.2_55_se/configuration/guide/swstack.html#wp1166403Minor Version Number Incom...

Member Since	‎03-09-2007 12:41 PM
Date Last Visited	‎09-25-2018 03:11 PM
Posts	9
Total Helpful Votes Received	4

User Statistics

User Activity

Cisco Prime 2.2 Wireless clients connected to an Access point historical data

Re: Cisco Prime 2.2 Wireless clients connected to an Access point historical data

Re: Cisco Prime 2.2 Wireless clients connected to an Access point historical data

Re: How to prevent loop in this scenario

Re: Adding a 3750X to a stack of 3750G's

Re: Adding a 3750X to a stack of 3750G's