About TrustNetworks

TrustNetworks · 08-16-2012

Good AfternoonI am experiencing the same problem described in this post https://supportforums.cisco.com/message/3421454#3421454I have seen this happen on different networks, with different equipment attached. It happens on both 2960 and 3750 switches...

TrustNetworks · 02-02-2011

Good MorningDoes anyone know where I can find the change logs for the ADSL Firmware's.I realize each firmware comes with its individual bug fixes, however there is usually a significant difference between the shipped firmware and latest firmware avai...

TrustNetworks · 09-03-2010

Good AfternoonI'm having trouble with the sync speed of a new 877, to a newly installed BT ADSL line. I realize there are many threads regarding this issue, and have tried the various DSL firmwares suggested in the forums including 4.0.017 and 4.0.0...

TrustNetworks · 06-10-2010

Good AfternoonWe are experiencing a strange problem where the router will stop accepting connections from the outside world. We can still ping the router, however we are unable to access any of the ports setup for port forwarding neither can we acce...

TrustNetworks · 12-13-2017

Being able to follow Cisco's own ADSM Quick Start Guide, would be one major reason :o(

TrustNetworks · 11-08-2012

Hi DaveI actually now suspect this is nothing to do with the Cisco equipment. Only that the delay that both STP and the link negotiation creates in bringing up the interface, has highlighted an existing issue with the Canon printers, that previously ...

TrustNetworks · 08-24-2012

leolaohoo wrote:P.S. not sure where you are, but bank holiday weekend here in the UK, have a good weekendI'm here in Australia but I'll be dropping by the UK in the next few weeks for a 5 weeks tour of Europe. Cool, bring some spare patch leads with...

TrustNetworks · 08-24-2012

Hi LeoNo worries, more like constuctive conversation, host specific because the printers, and specfic models are exhibiting consistent behaviour. Its unlikley that only those printers would have cabling issues, and the rest of the network being fine...

TrustNetworks · 08-23-2012

Hi MikeAppletalk was off, have disabled SNMP, although I think this might be required for the billing software. Also disabled WSD and Multicast discovery. None of these have had an effect, but I think as we have narrowed it down to a particular model...

Member Since	‎06-10-2010 05:27 AM
Date Last Visited	‎12-14-2017 12:02 AM
Posts	19
Total Helpful Votes Received	5

User Statistics

User Activity

Port Disables Every 10 Minutes

ADSL Firmware Change Log (Hwic and 877)

Cisco 877 and BT Problem

SRP527W NAPT Problem

Re: I'm not sure you get the

Port Disables Every 10 Minutes

Port Disables Every 10 Minutes

Port Disables Every 10 Minutes

Port Disables Every 10 Minutes