Yes, this offering is Cisco exclusivity and support is planned for all the Cisco QSFP 40GE capable d...

Make sure you have set the speed to 1000 ( speed 1000) on the interface and that you have at least 5...

To provide precision to the answers already provided:1) Today, go with the UP series. The P series *...

Yes it does.

You can change MTU for traffic using different COS values, for example if you can mark on the server...

You may have dot1q trunks and this increments the counter.

I agree, some confusion still on the picture, so trying to upload mine to show you :-) Please note t...

Yes your Peer-Link is 20 and you have 40GE uplinks, so you need a bigger peer-link: 40GE or more to ...

additionally for 1), you can call the 'vpc' same number vpc 1234 on both so it's clearer in your min...

Absolutely! Please send me a private message and also look at the CCO page white paper section on th...

Using trunks between ESXi is most common practice when connecting ESX hosts to switches. Take a look...

Not yet, it's in the works.

The nice part is that the SW detects it automatically and you don't have anything to configure on NX...

Replacing of fan trays, so the fans turn in the opposite direction and power supply ( as those have ...