About krishnamyworld

krishnamyworld · 10-04-2013

Hello All,I am new to STP, and i am facing some issues in my network.I have 2 3750X Switch in Stack,In logs i am frequently getting MAC Flapping log, while searcing on Internet i am getting only that it's a L2 Loop but no resolution.Please guide me w...

krishnamyworld · 10-05-2012

Hi AllCan We use Cisco HWIC-4ESW as no Switch Port.

krishnamyworld · 10-04-2013

Thanks, can understand it's not a good Design. Will try to upgrade the switch but for the meanwhile is there any option to ignore or Block the mac to learn on diffrent ports.

krishnamyworld · 10-04-2013

G1/0/1 Towards DC Vlan 820G1/0/2 Towards DC Vlan 520G1/0/1G1/0/2Vlan 820Vlan 520Vlan 520Vlan 820G1/0/3G1/0/4G1/0/3 Uplink to Port G1/0/4G1/0/4 Uplink to Port G1/0/3DC - Datacentre Switches which we dont have sccessWe have made a L2 Loop from Port...

krishnamyworld · 10-04-2013

interface GigabitEthernet1/0/2 switchport access vlan 520 switchport mode access no keepaliveendDC-L3#DC-L3#sh run int g1/0/4Building configuration...Current configuration : 128 bytes!interface GigabitEthernet1/0/4 switchport access vlan 820 switchpo...

krishnamyworld · 10-04-2013

Hello, I have gone through the Document, i think its not issue from any Server Side also we are not using any teaming.But i have got some output from the Document -================================================DC-L3#sh mac address-table dynamic int...

krishnamyworld · 11-09-2012

Hi Eric i Am New To The Cisco Small Businness Switches, I have Cisco SF 300 Switch & i want it to configure it for my Ip Phones And Desktop.. Means Multilple Vlan On Single Port.. So Can You PleaseGuide me how to confiugre it

Member Since	‎02-02-2011 03:23 AM
Date Last Visited	‎08-24-2018 02:02 AM
Posts	9

User Statistics

User Activity

STP - Mac Flapping

No Switch Port

STP - Mac Flapping

Re: STP - Mac Flapping

Re: STP - Mac Flapping

Re: STP - Mac Flapping

Re: Linksys Cisco SRW248G4P 48-port 10/100 + 4-port Gigabit Swit