About ManuelRubio2020

ManuelRubio2020 · 01-17-2020

Hello Guys, I am trying to flash a 3164 from 7.0(3)I7(5a) to nxos.7.0.3.I4.8.bin But i keep getting the below error:I do have space so i do not think it's a space issue.Any ideas? Thank you. switch# sh verCisco Nexus Operating System (NX-OS) Softwa...

ManuelRubio2020 · 01-20-2020

Hi, I am using: switch# show verSoftware BIOS: version 08.34 NXOS: version 7.0(3)I7(5a) BIOS compile time: 04/26/2018switch#switch#switch#switch# copy scp://vrxuser:vrxuser@192.168.1.1/opt/vr4/binaries/switch/cisco/nxos.7.0.3.I4.8.bin bootflash:/...

ManuelRubio2020 · 01-20-2020

Hello, This is the full command:*nxos.7.0.3.I4.8.bin 100% 670MB 17.2MB/s00:39**Copy complete, now saving to disk (please wait)...**Copy complete.**switch#**switch# install all nxos bootflash:nxos.7.0.3.I4.8.bin**Installer will perform compatibility c...

ManuelRubio2020 · 01-17-2020

I am having the same issue with a 3164 going from nxos.7.0.3.I7.5a.bin to nxos.7.0.3.I4.8.bin, I do have space.Any ideas? Below my logs:Thanks.switch# sh verCisco Nexus Operating System (NX-OS) SoftwareTAC support: http://www.cisco.com/tacCopyright (...

Member Since	‎01-17-2020 07:24 AM
Date Last Visited	‎01-27-2020 09:03 AM
Posts	4

User Statistics

User Activity

3164 "Failed to process nxos image". Pre-upgrade check failed. Return code 0x404F0003 (SRG file not present/some modules are not supported in target image). 2020 Jan 17 15:15:15 switch %$ VDC-1 %$ %USER-0-SYSTEM_MSG: ISSU ERROR: nbi_open failed. - new_installer

Re: Nexus 3k 6.0.2.A8.4a TO 7.0.3.I7.3 SRG error (0x404F0003)

Re: Nexus 3k 6.0.2.A8.4a TO 7.0.3.I7.3 SRG error (0x404F0003)

Re: Nexus 3k 6.0.2.A8.4a TO 7.0.3.I7.3 SRG error (0x404F0003)