About kalen4101

kalen4101 · 10-18-2020

Good day all, Upgrading our 5525, one is active, other is standby. Upgrading the standby first. When I say upgrade that's the IOS as well as ASDM. Then active will be done at a later date. So as to the GUI(ASDM), we log into it in the active ASA a...

kalen4101 · 10-12-2020

In the GUI I tried to use the update function. Went to tools>check for update, selected it clicked to upgrade to 9.12.3, currently on 9.10(1). After 6 hours it still at "status" please wait while software request is processing" I tried cancelling...

kalen4101 · 10-01-2020

Good morning/afternoon/evening depending on where in the world you call home. Hoping this is an easy one for you all. My boss has asked me for a copy of the rule-set from our firewall. I did the copy start tftp command and have the start-up config ...

kalen4101 · 09-29-2020

Good afternoon a truly strange one. Have a switch, up and operational for 2 years, always had authentication on management login. Last used it Thursday. Today I try to log in and keeps giving me access denied. Verified username and I'm not locked ou...

kalen4101 · 06-23-2020

Switch(config)# boot system flash:packages.confSwitch(config)# exitwrite memoryswitch#install add file flash:cat9k_iosxe.16.09.04.SPA.bin activate commit switch is currently using "cat9k_iosxe.16.09.02.SPA.bin" I've use the above on 2 other cat 9300...

kalen4101 · 10-28-2020

One last question. I understand the ADSM lives on the switches, but to launch the GUI we have an icon(shortcut) on our jumpboxes. Do I need to replace that for the new adsm update? Where would I get the shortcut from?

kalen4101 · 10-26-2020

Looking at the instructionshttps://www.cisco.com/c/en/us/td/docs/security/asa/upgrade/asa-upgrade/asa-appliance-asav.html#concept_F0701C3A86854801958757CEF1E4D999 I see it says to load the Active and standby from the same source. Now I was wonderin...

kalen4101 · 10-12-2020

Killing it through task manager will not affect the firewall, correct?

kalen4101 · 10-01-2020

Thanks. And if we are using FTD?

kalen4101 · 10-01-2020

Thanks everyone. Issue was found and temporarily resolved. Seems there is a problem with the radius server. For some reason there are 3 switches listed that are not in use or even exist. Someone disabled those switches and even though they don't se...

Member Since	‎01-23-2020 11:51 AM
Date Last Visited	‎11-08-2020 07:08 AM
Posts	28
Total Helpful Votes Received	5

User Statistics

User Activity

Cisco ASA 5525 upgrade ?

ADSM 5525 Update won't stop downloading

Cisco ASA 5525 ruleset

Authentication ceases to authenticate on Cat 9300

Cat 9300 firmware not upgrading

Re: Cisco ASA 5525 upgrade ?

Re: Cisco ASA 5525 upgrade ?

Re: ADSM 5525 Update won't stop downloading

Re: Cisco ASA 5525 ruleset

Re: Authentication ceases to authenticate on Cat 9300