I have a UC540 that has both MAC and PC users who need VPN access. Currently the router has the Windows based Anyconnect client installed, and users connecting with PC via the Anyconnect client work fine. I've installed the MAC Anyconnect client on ...
It initializes, then gives "SPCP Register Token Rejected" and won't connect. I have 9 other identical phones working, and this is the only one with a problem. I've tried a factory reset, and still no change. Any ideas?
I just tried updating the software, both the IOS and the CUE for a UC520 router using the CCA 2.0.1. It formatted the flash, then failed to install the IOS or the CUE claiming I had a FTP or TFTP server running. This laptop has never had/ or run a...
I do need a solution soon, as 2 additional 524 phones have also been ordered. I suspect they will also fail to register. The customer will not be happy with 3 non working phones. If this can't be fixed, will Cisco offer me free 7960 upgrades / rep...
License is UC520-24U-8FXO-K9:FTX133383C124 user license, with 3 ip communicators phones, and 9 of the 524SG phones connected. The tenth 524 phone will not register. I took the phone that was failing to register and it auto registered on another UC52...
I rebooted the pc, reset the ip, turned off my antivirus and firewall again, disabled windows firewall again, disabled the wirelss card. Ran the upgrade another time. SUCCESSFUL!I think somewhere while corresponding with the forum, and disabling/ e...