About Jim

Jim · 05-10-2016

Hi, We have a new UCS-Mini with a secondary chassis connected, we have identical B200 M4s populated in each chassis, running ESXi. At a vCenter level all of the vNICs reported for the blades in the primary chassis are showing as 10000Mbps whilst all ...

Jim · 05-11-2016

Thanks, that makes sense. Do you have a link to the documentation that shows that, the data sheet for the VIC clearly shows the architecture: http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/ucs-virtual-interface-card-1340/datashee...

Jim · 05-10-2016

Hi, The primary chassis has 6324 FIs, the secondary has 2208XP IOMs. All the B200M4s are the same: 1340 VICs with no port expander, so 4 DCEs or 20Gbps per fabric. Cheers.

Member Since	‎05-10-2016 09:52 AM
Date Last Visited	‎10-09-2017 09:36 AM
Posts	3

User Statistics

User Activity

UCS-Mini vNIC speed in secondary chassis

Thanks, that makes sense.

Hi,