Found tones of documentation on how to setup SpeechView with Cisco unity and exchange . First I would like to know if this feature is still implementable with Office 365 integration. If so, is there any documentation on how to deploy it ?
Thanks
So...
You don't need to generate traffic to keep your cellular interface alive. I went through the exact same issue and adding the following command "dialer idle-timeout 0 either" on the cellular interface which sets timeout to infinity.
UDLD Enable just detects if a link becomes Unidirectional while UDLD detects and shuts down the interface if is sends UDLD packets but does not receive any.
That should work : As an example : (config)#mac access-list extended macext5
(config-ext-macl)#deny any host 0000.0000.0009
(config-ext-macl)#deny any host 0000.0000.0010
(config-ext-macl)#permit any host 0000.0000.0011
(config-ext-macl)#permit any ...
