06-19-2018
09:00 PM
- last edited on
03-25-2019
10:30 PM
by
ciscomoderator
Hi,
We are moving our old UC560 to a house thats only have satellite Internet. Unfortunately, the provider (XPlornet) does not provide access to BridgeMode on their modem router. To avoid Double Nating, i have desactivated WAN port and use the Modem as the router and VLAN and DHCP provided by the Cisco UC560 (IP Tel Router)
So, my satellite modem is : 192.168.10.1
UC560 Data Vlan1 : 192.168.10.2
UC560 Voice Vlan100 : 1.1.1.0
CME Vlan90 : 10.0.10.0
I have put a static route : 0.0.0.0 0.0.0.0 192.168.10.1 to allow the UC560 to get out to the Internet.
The problem is : it's only works with the Data VLAN. The voice and Cue VLAN does not ping Outside.
Does anybody know how to allow the Voice VLAN to use the gateway 192.168.10.1?
I have put ACL Rules but it does not seems to work.
NAT and Firewall are disabled. And Wan port too.
Thanks for your help.
06-19-2018 09:21 PM
probably set a static route on your modem to point back to the vlans 100 and 90 via 192.168.10.2
06-19-2018 09:29 PM
Thanks Dennis for the fast answer. Unfortunately, I don’t have any routing tools possible with the modem. Everything is blocked inside the configuration web interface.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide