Two sites, Site A and Site B. CUCM PUB and 1 CUCM Sub in Site A and 2 CUCM Sub in Site B. Region setting had G.711 codec for calls between site A and site B but recently I changed that to G.729 due to bandwidth issue between those sites.
My supervisor wants me to find a solution which allows every call from/to to the 7937 phones to use G.711 codec for quality issues and leave the rest of the phones to use G.729 from the region setting. I wonder how it is possilble. Does it make sense to create a new region and device pool and setup the region to use G.711 for calls between those sites?
Yes this would be a solution to create a device pool with own region for 7937 phones to force g711 codec to/from all other devices and locations. If u use location based CAC take care of your bw calculations.
This document summarises various health checks that can be done on a Cisco VIM pod.
Cloud sanity checks the health status of network, storage and various openstack infrastructure components like mariadb, rabbitmq etc....
The following pre-requisites are necessary for the migration from RSP440 to RSP880-LT to be successful.
Make sure that you have console access to the router.
Verify that the system is running a minimum o...
BGP flowspec in a nutshell is a feature that will allow you to receive IPv4/IPv6 traffic flow specification (source X, destination Y, protocol UDP, source port A .. etc) and actions that need to be taken on that traffic (...
While gNMI is fairly new, it's becoming more and more powerful. Its abilities to simplify network management by the use of protocol buffer files and standard definitions are enabling our customers to integrate a lot ...
Today we are releasing to the public a tool to help find differences in command outputs in two points in time (IE pre and post MW).
The issues we are addressing is what commands to gather and how to successfully parse the data when timestamps, upti...