cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
604
Views
0
Helpful
5
Replies

827-4V transfer call

s.nasedkin
Level 1
Level 1

Is anybody known possible to make transfer call from one voice-port to another voice-port ?

How to make working hookflash and such services as "Hold","Call Waiting" ?

Is it possible with this model ?

5 Replies 5

didyap
Level 6
Level 6

The command to enable call waiting is call-waiting in the interface confid mode.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fvvfax_r/vrf_a.htm#wp1273009

Here is a document that explains the features supported on 800 series.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t2/ft_vs800.htm

goranselthofer
Level 1
Level 1

you have to tune different hookflash-in timings for different analoge phones connected to voice ports.

for example:

for siemens phone I have configured 150ms

for panasonic - 700ms

but you have to find out by yourself for a specific handset. try it.

I tried to do it. I received next:

Router(config-voiceport)#timing hookflash-in 700

%Hook flash is not supported

Router#sh ver

Cisco Internetwork Operating System Software

IOS (tm) C820 Software (C820-K9OSV6Y6-M), Version 12.2(15)T13, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2004 by cisco Systems, Inc.

Compiled Wed 16-Jun-04 14:37 by hqluong

Image text-base: 0x80013148, data-base: 0x80DE0F10

ROM: System Bootstrap, Version 12.2(4r)XM2, RELEASE SOFTWARE (fc1)

ROM: C820 Software (C820-K9OSV6Y6-M), Version 12.2(15)T13, RELEASE SOFTWARE (fc2)

Router uptime is 2 hours, 4 minutes

System returned to ROM by power-on

System image file is "flash:c820-k9osv6y6-mz.122-15.T13.bin"

CISCO C827-4V (MPC855T) processor (revision 0x801) with 31744K/1024K bytes of memory.

Processor board ID JAD07070XNW (2732858930), with hardware revision 0000

CPU rev number 5

Bridging software.

4 POTS Ports

1 Ethernet/IEEE 802.3 interface(s)

1 ATM network interface(s)

128K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read/Write)

2048K bytes of processor board Web flash (Read/Write)

Configuration register is 0x2102

The information in this document is based on these software and hardware versions:

Cisco 1750 routers

Cisco IOS® Software Release 12.2.5a

H.323 version 2 software support is a prerequisite. This has been available since Cisco IOS Software Release 12.05T and later. Hookflash detection/generation is supported on analog Foreign Exchange Station (FXS) and Foreign Exchange Office (FXO) voice ports. These are available on these Cisco hardware platforms:

1750/51/60

2600

3600

3700

MC3810

Catalyst 4000 with Access Gateway Module (AGM)

My model is not listed in this list.