01-12-2012 09:52 AM
I searched on this and found this post:
https://supportforums.cisco.com/message/985700#985700
"In order to have the 9 pre-pended, you have to go to the translation pattern for this user or every user, under the Calling Party Transformations, Prefix Digits (outgoing) add 9 and save it. In order to have the 9 pre-pended, you have to go to the translation pattern for this user or every user, under the Calling Party Transformations, Prefix Digits (outgoing) add 9 and save it."
My question is this: If I make that change will that affect regular outbound dialing when the users are used to dialing the 9?
Solved! Go to Solution.
01-13-2012 05:52 AM
Hey G-Man,
There is a nice step by step guide in this doc;
Add Prefix to the Missed Call Number
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00805b6f33.shtml
Cheers!
Rob
Please remember to tag your threads and help support "Teachers without Borders"
https://supportforums.cisco.com/community/netpro/idea-center/communityhelpingcommunity
01-13-2012 05:52 AM
Hey G-Man,
There is a nice step by step guide in this doc;
Add Prefix to the Missed Call Number
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00805b6f33.shtml
Cheers!
Rob
Please remember to tag your threads and help support "Teachers without Borders"
https://supportforums.cisco.com/community/netpro/idea-center/communityhelpingcommunity
01-20-2012 01:57 PM
Thanks Rob!
The only difference is that on CUCM 8.6 the "global" settings are on the gateway configuration and not under the system parameters.
+5
01-20-2012 02:06 PM
Ah - well... they are still in service parameters as 'global' settings (hidden in 'advanced' settings).. but you can override them at the device pool, or gateway level. Each of those being more specific in that order...
Device pool makes sense in most cases, global/service params if you're on a single country cluster.
Rob's never wrong :-)
01-24-2012 07:30 AM
I don't think I checked the advanced settings.
I should know by now never to question Rob.
01-26-2012 08:48 AM
Hahahahahahahahahahahahahahaha!!
03-27-2013 07:35 AM
I am looking for the same answer for the original post. I want to pre-pend a 9 to the outbound call log so you can redial a number you've already called without editing it. The answer given above is placing a 9 on the incoming calls, which I have already done. I want to leave the 9 on the call log of an outbound call. Any help would be appreciated!
And yes I'm hijacking this post! Sorry in advance!
04-05-2016 04:34 PM
Just an update for people who were taken here by google.
Tested on CUCM version 9 and 10
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide