Hi,We have AT&T MIS T1 Link and would like to run VoIP across the T1. Head-office End: VPN 3060Branch Office End: PIX 515E. Can someone quide how should I do the QoS in this setup.
BEN,Currently one of my client Network Topology is VOIP 4-digit dialing on the 3640 via legacy Nortel Opt-11 PBX between HK and California. I want to deploy a better solution AVVID. What would you recommend?.Allen/Network Engineer.
I would like to use an outbound application on a pots peer to limit some calls' duration (simple session-like application with timer). I configured application xxx out-bound on the outgoing pots dial-peer but the TCL script has been never started. I ...
Dear Netpros,Does the application "debitcard_multi-lang_Cisco.1.1.0.0.tcl" support Laos Language?? If yes then could someone suggest the changes to be made in the TCL Scripts to support the language of Laos which will fall under exceptional languages...
Hi, I have a question regarding VoIP failover to a PBX in order to reach remote locations via PSTN when some link fails. I have a FR hub and spoke topology. The central site connects 80 remote offices and has an E1 link to an Ericsson PBX. The remote...
Hi, All!Our equipment:Nortel Meridian 1 option 11&cisco 2620 with NM-HDV+VWIC-MFT E1.M1/11 connected with 2620 by E1 CAS R2.Test scheme:--------------Phone1--M1/11-E1 CAS R2-2620+NM-HDV+MFT--LAN--5350--E1 PRI--M1/81--Phone2 During the call from phone...
Hello, Are there anybody using sip ver 2.1?We are going to upgrade from 2.0 to 2.1but see that changing the IP address of the SIP requires uninstall all SIP and install again with a new IP !However in SIP 2.0 we can change the IP address of the SIP a...
Does sender request bandwidth or receiver? In cisco document, it looks that receiver request the bandwidth reservation. If that's the case, how does receiver knows what the bandwidth it needs request? Will it be inside the sender RSVP path?
ip rsvp sender-host 10.1.35.6 10.1.23.3 tcp 23 0 50 80 this command doens't show up in the running config.But show ip rsv sender shows this:r5#sh ip rsv senderTo From Pro DPort Sport Prev Hop I/F BPS Bytes10.1.23.3 ...
AllI wish I am doing the right thing.I wish to ask people to enter the password before making the outgoing voip call from 3640 voice gateway.But I don't want the user to enter the username, as the username suppose to be their incoming telephone no. s...
I am working on a LAN/WAN design to provide QOS for voice and video between multiple sites. Each location (about four) will have a Cisco firewall and router connecting it to the Internet. The sites will be interconnected via a site-to-site (firewal...
Dear all,i am trying to setup an H323 VoIP between a Multitech voice gateway MVP400( in the Head Office) with Cisco ATA186 ( in a remote branche connected to HO through WAN) .as a first scenario , i have configured the MVP400 for FXS operation ,...
I've set up VoiceMailPilot's CSS.However,in CCM trace, It seems CCM isn't using VoiceMailPilot's CSS.I think even if it sets up VoiceMailPilot's CSS, CCM is using phone(or line)'s CSS.Would you teach me the answer of the following questions?1)When do...
hi dears. I am begineer. Pls tell me that is it possible to implement VoIP solutions over cisco 2522 series routers. I mean this series support this configurations for VoIp.
HiThe problem i'm facing is the next:I have a Cisco AS5850 with an Euro ISDN trunk connected to a PBX. The pbx send out the calls in order the A5850 terminate these calls in a remote gateway. I receive only a maximum of 12 digits of the complete stri...
