06-23-2008 05:16 PM
Hi need to implement CUCM with PSTN gateway to Brasil Telecom in Parana Brazil.
Has anyone done a ideal configuration to their R2?
Can some one send the config??
06-24-2008 12:54 AM
Hi, if you search the forum with the form on the right, you can find few threads about E1 R2 in Brazil.
01-31-2011 10:52 AM
Hey man,
Following the configuration for Brazil.
controller E1 0/0/0
framing NO-CRC4
ds0-group 0 timeslots 1-15,17-31 type r2-digital r2-compelled ani
cas-custom 0
country brazil use-defaults
metering
category 2
answer-signal group-b 1
!
voice-port 0/0/0:0
disc_pi_off
timeouts interdigit 0
timeouts call-disconnect 0
I know that you have been done this many times, but following the correct configuration.
best regards my friend.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide