I have been given a task to verify BTS and PackeCable Compatibility.
This is the first time I have ever heard about PacketCable.
Did some search on cisco.com and came to know that its used for provisioning [broadly speaking].
My task is to figure out if BTS 10200 is PacketCable 1.0 and PacketCable 1.5 compatible. I found that its PacketCable 1.0 compatible and another document depecting the limitation on CMS Subscriber Provisioning "The scope of the feature is limited to subscriber provisioning in a PacketCable 1.5 network"
If at all BTS is compatible with PacketCable 1.0/1.5 -
1) When the server is configured in the PacketCable 1.0 mode, will it service a PacketCable 1.5 compatible CPE device( MTA) ?
2) When the server is configured in the PacketCable 1.5 mode, will it service a PacketCable 1.0 Compatible CPE device( MTA) ?
Packetcable specifications cover many areas including provisioning, audio servers, signaling, pstn interconnect, event messaging, electronic surveillance, security, etc. The BTS supports both PC1.0, 1.5 and PCMM as defined here:
Listen: https://smarturl.it/CCRS9E2 Follow us: https://twitter.com/ciscochampion
The internet has grown exponentially for over 30 years and will soon surpass 30 billion connected devices. Yet, even for its age and the all the connected devices, the Intern...
Listen: smarturl.it/CCRS8E48 Follow us: twitter.com/CiscoChampion One word describes the life of network operations, and that word is complex. It’s no wonder when your responsibility is to maintain multi-layer IP and Optical networks that span m...
The 2021 IT Blog Awards, hosted by Cisco, is now open for submissions. Submit your blog, vlog or podcast today. For more information, including category details, the process, past winners and FAQs, check out: https://www.cisco.com/c/en/us/t...
Listen: https://smarturl.it/CCRS8E39 Follow us: twitter.com/CiscoChampion5G and Wi-Fi 6, the next generation of mobile wireless technologies are here! But what does that mean? Where and how is 5G being deployed? What is Wi-Fi 6? Who’s on first? ...
loadbalancing is one of the more complex items in hardware forwarding. of course we have talked about it many years on cisco live (id 2904) with ever incrementing more detail. and there is the support forum article on loadbalancing.