07-31-2008 02:01 AM
Dear all,
is it possible for a CME ,wich is loaded on a router, to handle mgcp calls on FXS ports with all mgcp feature ,like call waiting ,call transfer,...?
Best Rgards,
Farshid.sh
Solved! Go to Solution.
08-01-2008 06:19 AM
Hi Farshid,
I think that you would want to use SCCP (not MGCP),due to the fact that SCCP has support for many common Telephony features;
Check out Table 1 from this VG224 doc;
http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_data_sheet09186a00801d87f6.html
This is also an excellent doc;
SCCP Controlled Analog (FXS) Ports with Supplementary Features in Cisco IOS Gateways
http://www.cisco.com/en/US/products/ps6441/products_feature_guide09186a0080483a76.html
Hope this helps!
Rob
07-31-2008 05:04 PM
FXS ports handle all the aboves features on the CME, but you have to configure the CME to use SCCP with the FXS.
08-01-2008 06:19 AM
Hi Farshid,
I think that you would want to use SCCP (not MGCP),due to the fact that SCCP has support for many common Telephony features;
Check out Table 1 from this VG224 doc;
http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_data_sheet09186a00801d87f6.html
This is also an excellent doc;
SCCP Controlled Analog (FXS) Ports with Supplementary Features in Cisco IOS Gateways
http://www.cisco.com/en/US/products/ps6441/products_feature_guide09186a0080483a76.html
Hope this helps!
Rob
08-02-2008 08:49 AM
Dear rob and noc-au,
many thanks to your helpful replies,wish u all the bests.
Regards,
Farshid.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide