I've got a Gold Fax fax server set up to run off of 4 FXS ports on an ICS. I have two small hunt groups set up to handle the inbound calls but I'm having trouble passing the caller id information into the fax lines.
What I would like to do is this:
HP: 7060 -> routes to FaxModem1 on server and passes a predetermined number (it can really be anything) to the fax server.
HP: 7050 -> routes to FaxModem2-4 on server and passes a different predetermined number.
I have almost everything set up. I have both hunt groups set up and working correctly. 7060 is ringing to the correct modem, and 7050 is ringing to all three modems (longest idle) correctly. The only problem is that I can't seem to pass any sort of caller id to the FXS ports. I've hooked up a regular analog phone and it's not getting anything either. The CCM is connected to the FXS ports with MGCP.
Hi Everyone, Would like to extend my thanks in advance for anyone offering assistance. As the subject hints, anyone here know of a way to convert IOS configs to XR config? I seen and heard about SOX tool but i am unable to find it. I also tried ...
When I run the command 'sh controllers fabric fia q-depth location 0/0/CPU0' or any 0/X/CPU0 and see the following, what exactly does it mean? RP/0/RSP0/CPU0:Router#sh controllers fabric fia q-depth location 0/0/CPU0********** FIA-0 **********Categor...
Symptoms: the root password can't log in by GUI Solution:1) login CLI as admin2) write command "ncs webroot enable" without qutations3) we can check the status by "ncs webroot status" hope this will help someonethanks
ISO images are as close as we can get to the old school classic IOS images from back in they day.
Doing upgrades by putting a new image on the flash, changing the boot pointer and reload was and is still the walhalla of Cisco based devices.