cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
428
Views
4
Helpful
1
Replies

Calling Line Restricted Problem

teodor.dobrev
Beginner
Beginner

Hi to all,

in the following scenario ccme interconnected to Panasonic KX-TD-816-232 PBX through ISDN BRI, can't see calling line ID on incoming(for ccme) calls.

In voip ccapi debug i see Presentation=Restricted on the incoming dial-peer 10. Tried to override this field with no success. Please help with this. Will atach debug and running config.

1 Reply 1

paolo bevilacqua
Hall of Fame Master Hall of Fame Master
Hall of Fame Master

Indeed the PBX is placing the call with presentation restricted:

Calling Party Number i = 0x01A1, '114' <-- BIT 5 is set !

Hence IOS is dutifully restricting CLID.

Please check PBX configuration to allow CLID presentation.

Hope this helps, please rate post if it does!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: