cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2298
Views
30
Helpful
5
Replies

Cisco FXO auto disconnected while talking

domanhtien
Level 1
Level 1

Hi,

I am configuring the CISCO2901/K9:

Cisco CISCO2901/K9 (revision 1.0) with 483328K/40960K bytes of memory.

Processor board ID FGL1737248D

2 Gigabit Ethernet interfaces

1 terminal line

4 Voice FXO interfaces

DRAM configuration is 64 bits wide with parity enabled.

255K bytes of non-volatile configuration memory.

250880K bytes of ATA System CompactFlash 0 (Read/Write)

After I finish FXO configuration and make phone calls from SIP phone CP-3905 to PSTN through FXO ports. The problem is while 02 parties are talking about 2 to 3 minutes, and the call is disconnect suddenly.

Attached file is my running configuration. How can I fix this problem?

Tnks

1 Accepted Solution

Accepted Solutions

dsobrinho
Level 9
Level 9

Hi guys,

Try configure the  with

Example:

voice-port 0/0/0

trunk-group LINE_FXO_outgoing  -> This is a trunkgroup for outgoing calls.

supervisory disconnect dualtone mid-call

cptone BR

timeouts call-disconnect 1

timeouts wait-release 3

connection plar 372428

description --[NUMBER-ANALOG-LINE]

Best regards,

Daniel Sobrinho

Daniel Sobrinho

View solution in original post

5 Replies 5

domanhtien
Level 1
Level 1

Hi all,

I am a newbie in Cisco Voice, anyone have any ideas about this problem ??

dsobrinho
Level 9
Level 9

Hi guys,

Try configure the  with

Example:

voice-port 0/0/0

trunk-group LINE_FXO_outgoing  -> This is a trunkgroup for outgoing calls.

supervisory disconnect dualtone mid-call

cptone BR

timeouts call-disconnect 1

timeouts wait-release 3

connection plar 372428

description --[NUMBER-ANALOG-LINE]

Best regards,

Daniel Sobrinho

Daniel Sobrinho

Hi Sobrinho,

I configured base on your advice and it's fixed now.

Thank you.

Tiendm

Good approach Sobrinho!!!!! (+5 Stars)

@domanhtien

Please remember to rate helpful  responses and identify helpful or correct answers.

Cheers
Bruno Rangel
Please remember to rate helpful responses using the star bellow and identify helpful or correct answers

Hi Domanhtien,

I am very happy for everything is working now.

Thank you for your feedback.

Thank you Bruno for your feedback as well.

Best regards,

Daniel Sobrinho

Daniel Sobrinho
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: