cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2927
Views
0
Helpful
1
Replies

Cisco IP Phone 8865 VPN Client support

INEM
Level 1
Level 1

Hello folks,

I have a cisco ip phone 8865 at home and I want to connect it by VPN to the work telephony system which run asterisk, any idea how to do this, at home I only have a normal router, it is not a cisco router. In my work I have a VPN server running in a linux box with L2TP certificates.

I only see this information:

Set up a Phone for Use with VPN

Before You Begin

To complete this procedure, you must have a valid TFTP server address. If you do not have this information, contact your administrator.

You cannot use the Wi-Fi client with the Cisco IP Phone 8865NR.

Procedure
    Step 1   Press Applications .
    Step 2   Select Admin settings.
    Step 3   Select one of the following menu items:
    • All phones connected to the Ethernet: Ethernet setup
    • Cisco IP Phone 8861 and 8865 users that use Wi-Fi: Wi-Fi client setup
    Step 4   Select IPv4 Setup.
    Step 5   Navigate to Alternate TFTP and choose On.
    Step 6   Select TFTP server 1.
    Step 7   Enter your TFTP server address in the TFTP server 1 field.
    Step 8   Press Apply.
    Step 9   Press Continue.
    Step 10   Press Exit.

    REFERENCE: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8800-series/english/user-guide/P881_BK_C3A802A0_00_cisco-ip-phone-8800-user_guide/P881_BK_C3A802A0_00_cisco-ip-phone-8800-user_guide_chapter_00.html#CUIP_TK_C61DF096_00 

    Is there any possibility for my scenario?

    Thanks in advance

    1 Reply 1

    bgeasa
    Level 1
    Level 1

    Were you able to resolve this?  I am faced with the same issue...

    Getting Started

    Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: