Hi all,
I am facing the problem of cross call.
What happen is that,when someone is in a call and other people need to make a new call it dial to get voice tone, but it receive the cross talk (not the voice tone).
Someone known what could this?
The configuration is following:
voice-port 2/0
input gain 10
output attenuation 10
no vad
cptone BR
timeouts initial 4
timeouts call-disconnect 5
timeouts ringing 20
timeouts wait-release 5
timing sup-disconnect 1500
!
voice-port 2/1
input gain 10
output attenuation 10
no vad
cptone BR
timeouts initial 4
timeouts call-disconnect 5
timeouts ringing 20
timeouts wait-release 5
timing sup-disconnect 1500
Thanks