03-16-2010 08:12 PM
I am integrating a CUCM 7.02 with a S8400 Avay PBX through h.323.
I added a h.323 gateway in CUCM with Avaya IP address and tested the integration.
But I only receive calls from Avaya PBX. I am not able to make calls from CUCM to Avaya.
The codec is setup to G711ulaw. I´ve tried Fast Start with Media Termination Point, but it didn´t work.
Does someone already experienced this kind of problem?
03-17-2010 01:40 AM
Hi
Have you added a route pattern to point send calls to the H.323 gateway?
Thanks
Aaron
03-19-2010 09:59 AM
Aaron, thanks for the reply.
Related to the route patterns, they are pointing to the gateway.
I solved the problem with CUBE. I´ve used a sip trunk to the cube and a H.323 call leg to avaya (I´ve configured that on CUBE).
After that, calls are working normally.
Carlos Fujimura.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: