cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
797
Views
0
Helpful
1
Replies

h323 to SIP calls

raja Saravanan
Beginner
Beginner

Can someone explain how h323 to SIP calls work & vice versa.

1 Accepted Solution

Accepted Solutions

Steven Holl
Cisco Employee
Cisco Employee

The following messages are mapped:

SIP <---> H323

INVITE - SETUP

100 Trying - Call Proc

180 Ringing - Alerting

183 Session Progress - Progress

200 OK (for INVITE) - Connect

BYE - Release Complete

With H323 to SIP CUBE, if fast start occurs on one leg, early offer needs to happen on the other (and vice versa).  Most SIP devices these days to early offer (SDP in invite) so you typically need fast start enabled on both directions of the H323 leg for this design.

Check out this link for more information:

http://www.cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-h323sip_ps5640_TSD_Products_Configuration_Guide_Chapter.html

View solution in original post

1 Reply 1

Steven Holl
Cisco Employee
Cisco Employee

The following messages are mapped:

SIP <---> H323

INVITE - SETUP

100 Trying - Call Proc

180 Ringing - Alerting

183 Session Progress - Progress

200 OK (for INVITE) - Connect

BYE - Release Complete

With H323 to SIP CUBE, if fast start occurs on one leg, early offer needs to happen on the other (and vice versa).  Most SIP devices these days to early offer (SDP in invite) so you typically need fast start enabled on both directions of the H323 leg for this design.

Check out this link for more information:

http://www.cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-h323sip_ps5640_TSD_Products_Configuration_Guide_Chapter.html

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: