03-14-2006 04:47 AM
Hi every one.
How I can change the default port for H323 Singalling ?? can any bosy guide me how to use 1200 tcp port signalling instead of default port 1720.
03-20-2006 07:09 AM
Use policy routing :
Ex:
ip access-list extended h323-signaling
permit tcp any any eq 1720
permit tcp any eq 1720 any
deny ip any any ! Just for statistics
!
!
route-map h323-signaling permit 10
match ip address h323-signaling
set ip precedence flash
!
interface FastEthernet 1/0
ip route-cache policy
ip policy route-map h323-signaling
03-23-2006 03:02 AM
Hi.
thanks for the reply. I dont need access control. All I need to use port 1214 instead of 1720 in Cisco IP to IP gateway configuration.
My Cisco-3661 will listen to Voice Signalling on port 1214 instead of 1720. Can you help me how to change or use 1214 tcp port for h323 signalling.
03-23-2006 04:08 AM
Hi,
you can chanve voip service options.I havent tried my be this can help.
voice service voip
h323
emptycapability
h225 listen-port xxxx
03-23-2006 05:56 AM
Hi
Thanks for the reply. I dont have this command in my IOS I have 123-14.T2 in my 3661 Router.
please advice
Regards
ISrar
03-28-2006 06:43 AM
use following in voip dialpeer:
session target ipv4:[ipv4]:[port]
03-28-2006 12:35 PM
Hi!
with this interface config command:
h323-gateway voip id xyz ipaddr 10.1.1.1 1214
Regards,
Bela
04-01-2006 02:42 AM
Hi!!
I have set this config but still 3640 is listening to 1720 instead of 1214. please advice
here is my config
interface Ethernet0/0
ip address 192.168.0.12 255.255.255.240
half-duplex
h323-gateway voip interface
h323-gateway voip id Gw-Gk ipaddr 192.168.0.12 1214
!
04-03-2006 08:22 AM
Sorry, I haven't tried it yet...
May be ip port-map command can help you.
Regards,
Bela
04-22-2006 01:47 AM
Hi
thanks, its good same like port forwarding in linux .. Well I have 12.3(14)T2 ios in my router but I dont have this command .. can u please tell me the IOS version to use ??
I have 3661
Thanks
israr
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide